Papablic SafeguardPlus vs. Momcozy D8: Which Baby Bottle Washer Is Better?

I probably would have asked the same question when my twins were babies: why buy a bottle washer when you already have a dishwasher?

But bottles aren't the only thing you need to clean. There are nipples, valves, pump parts, tubing, and plenty of tiny pieces. Instead of putting everything into the dishwasher with last night's dinner plates, a dedicated bottle washer is designed specifically for these feeding items, giving everything its own place and letting you wash a full batch at once.

When you're pumping or bottle-feeding multiple times a day, that can save a lot of time. I remember spending countless hours at the sink when my twins were babies, so anything that can make that routine easier gets my attention.

When it comes to capacity, these two are basically tied. Both the Papablic SafeguardPlus™ and Momcozy D8 can accommodate up to 8 bottles.

That matters to me because I wouldn't want a bottle washer if I had to run it four or five times a day. I want to be able to load it up and get through a larger batch at once. Both machines can also accommodate up to 2 sets of breast pump parts.

Where I noticed a difference was in how Papablic handles some of the smaller pieces. Papablic has dedicated placement areas for narrow parts and tubing, including things like Dr. Brown's vent tubes. And honestly, those tiny pieces are some of the most annoying things to wash by hand.

So overall, I'd call the capacity a tie, but I think Papablic has put a little more thought into where those smaller feeding accessories actually go.

This is where I think the biggest difference starts to show. Both machines are designed to clean bottles and pump parts, but Papablic and Momcozy take a different approach to the water used during the cleaning process.

The Papablic SafeguardPlus™ has a built-in water purification system, while the Momcozy D8 does not. At first, I wasn't sure how much that would matter. It's a bottle washer. Isn't the point just to clean the bottles?

But then I started thinking about what you're actually putting into the machine every day. If you have hard tap water, you're running that water through the washer again and again. Over time, the minerals in the water can contribute to water spots, cloudy-looking parts, mineral deposits, and limescale buildup inside the machine.

That's why I didn't just want to know how the bottles looked after one wash. I wanted to know what was happening to the water going into the wash system.

In my original Papablic review, I did a simple water test using a TDS meter. I checked my tap water, the water processed through Papablic, and the water from my household filtration system.

My tap water measured around 309–310 ppm, while the water coming through Papablic measured around 25 ppm. My Berkey-filtered water measured around 300–307 ppm in that particular test.

The next thing I paid close attention to was drying. Because there's nothing more annoying than running a full wash and sanitize cycle, opening the machine, and finding everything still wet. At that point, I have to take all the bottles and parts out and put them on a drying rack anyway.

Papablic uses a dual-fan drying system, while Momcozy uses a single-fan system. I loaded both machines and compared the results after their cycles.

Both dried well, but Papablic was faster in my testing. I paid particular attention to the inside of the bottles and the smaller pump parts because those are the areas where leftover moisture tends to hide.

For me, the ideal bottle washer is one where I can open the machine, take everything out, put it away, and be done. Papablic won this round for me.

Now let's talk about wash speed. Imagine it's 2am. Your baby needs to eat, you're exhausted, and somehow every clean bottle in the house has disappeared. This is when a few minutes suddenly feel much more important.

Papablic's Rapid Wash cycle takes 12 minutes. The Momcozy D8's comparable wash cycle takes about 19 minutes. That's a 7-minute difference.

Obviously, 7 minutes isn't going to change my life on a normal afternoon. But when I need bottles or pump parts back quickly, I'll take the faster option. And if I'm running the machine multiple times throughout the day, those minutes start adding up.

Papablic gets another point from me here.

This category is closely connected to the filtration question. I don't just want to know how an appliance works on day 1. I want to know how annoying it's going to be 6 months from now.

Papablic does have a replaceable water filter, which means I'll eventually have to buy and replace a filter. That's a legitimate ongoing maintenance cost.

Momcozy doesn't have a replaceable water filter, but without built-in filtration, families with hard water may need to pay more attention to mineral buildup and descaling.

For me, this comes down to where I'd rather put the maintenance. Would I rather periodically replace a filter, or potentially deal with more mineral buildup and more frequent descaling? Personally, I'd rather replace a filter periodically than constantly worry about hard-water buildup. Especially because the whole reason I'm buying a bottle washer in the first place is convenience.

I don't want this comparison to make the Momcozy D8 sound like a bad machine, because I don't think it is. It holds 8 bottles just like Papablic. It's relatively compact for what it does. It also has a self-cleaning feature.

And ultimately, both machines accomplish the main thing I'm looking for: They take bottle washing off my hands.

If someone had given me either of these machines when my twins were newborns, I probably would have hugged them. But when I'm spending my own money and choosing between two machines that both handle the basics, the little differences start to matter.

If I had to choose between the Papablic SafeguardPlus™ and the Momcozy D8 for another baby, I'd choose Papablic.